Today we’re going to do a review of a Canon printer I bought a printer for my daughter’s computer and doing install and also maybe do a review so here we go is the front cover it looks like this clips up you all the power button home this hasn’t obviously come in until it’s ready this is the paper bra doesn’t hold too much paper you’ve got this little cover here this is looks like it might be a feeder pick up some description.
Canon PIXMA TS-5120 All-In-One / Review
Canon PIXMA TS-5120 All-In-One / Review
Again we’ll look for the yeah the ant catalog yeah we’ve got a let’s open this up you can see here there’s a few when it opens up the printer cartridges go the printing area to close this down lift this up and this is the scanner hmm notice this is up sure why that does it’s a probably reason say we have the disk cannon warranty and for that there it comes of this get the app and start printing from your smartphone basically a safety Sheila says don’t do anything stupid like dropping it in water or operating or touching it when your hands are wet or whatever and then the other one we have here is for getting started and will will go through that as well and as I said it has two printer cartridges now I want to tell you something we’re really interested T so and I’m going to explain this it has marked three markings for what you need for the printer cartridges so standard included she’s a black and wife high capacity which is XL and extra high capacity double XL now the ones which are listed with this which sure enough is 241 now it’s a standard printing thing now as I was taking this from the from the from the one place it was to the cache this one of the guys said to me hey by the way but you knew know that it come you need to get a printer cartridge because the printer cartridge that comes with it is only enough for setup and if anyone from Staples is listening if anyone from Staples is listening your guys are giving bad advice and information standard one is fine okay now the initial setup yes it does use a lot of ink but this will be more than just setup you’re giving me obviously because the guy wanted to sell me some printer cartridges obviously I need cartridges right but I’m setting this up initially staples have got a 14 day turnaround and I may be able to find it somewhere cheaper right and supposing I have to send it back so I just said yeah it sure that’s fine all anything if you’re anyone from Staples I stopped giving us it doesn’t work for but for for a printer it’s not too – gone bad is it nice little thing I kind of like it and then my one has fax capability so I call mine a an actually a 3-1 so it can do scan it can do print and it can do fax so I showed my daughter this earlier on when she came in and she was really excited and I think she’s gonna like this it’s a nice size it fits nicely on a table let’s power this beastie up what I’ve done is or what I’m gonna do as I said it’s going to be for my daughter’s a computer but what I’m gonna do is I’m gonna just test it running up on my computer make sure everything’s good to go then I’m going to go downstairs and load everything up I’ve removed the HP software on my my machine just to make sure there’s no conflicts and then we’re going to see so let’s plug the misters way around so see this is where the plug goes in bang getting there in power listen right so next step is to lift this up and then we press the on button yeah doing something right so I’m gonna zoom in a bit closer so you can see okay so I can’t my camera the screen is very small so I’m hoping you can see what it says but essentially it’s not language selection so we’re going to select language can we hit next I don’t want to send anything hit next select okay look can you see that it’s got a little displayed so it’s asking us to basically put can you see can you see so it’s got see and there B so I’m assuming b4 black so that comes out there and the black ink has got this black ink has got this this do from there so we take it out we get a nice tight room in there goes in that ready is it so it goes in this way hose that down dumb scanner I don’t know if you saw it but basically it Clint the head has come up with a message saying that a printhead cleaning is complete select okay wanting to do a test print so it’s over we pull this out yeah and we take this bit out of here and then we’re going to load this up with some paper funny enough I’ve actually got some kind of paper but we put this bill in here then we attach the cassette and you know something I have to admit compared to my HP printer I like this you can actually load up as opposed to a model and I’ve got a similar feeder but it’s you’ve gotta feed your fruit but this kind of keep some stuff already there so I’m kind of liking that so we then lift this up and underneath hair you can’t really see can you see this here so this is like the paper this again put the paper thing here pull this up keep pulling it out there we go okay so I miss the step to some reason so I’m gonna have to set it up slightly differently but I’ll actually wanted to take you a walk through these settings so if you hit home you’ve got and I’m hoping you can see you’ve got copy scan print you’ve got the Wi-Fi sign here question mark forms in helping this little gear which commonly is your settings so what I’m gonna do is I’m going to navigate down to the settings just to show you what we’ve got there so the first one we have settings and device settings and print settings so you can do all that kind of good stuff you’ve got the return back your land settings device user settings language selection firmware update feed settings you can reset the settings if we go back device settings done now ready you’ve got the web service setup you’ve got an eco mode and a quiet setting if we go to maintenance this is where you clear the all the printing stuff so you’ve got to print those or check pattern cleaning deep cleaning auto head alignment print print their head alignment value roller cleaning bottom plate pick the plate cleaning estimated ink levels this is a good one so you can see turnout of a color or black black and white and it even tells you in number what ink members you need system information gives you the current version printer name serial number mac address so yeah all this stuff is kind of good so what I’m going to do now is I’m going to connect it up to my um my laptop and I’m going to install the software it’s some get things going oh I’m hoping you can see everything yeah so let’s do a start setup we’re in Canada so it’s saying that I’ve got a Windows Firewall deactivate and that’s fine I was checking the printer status now we’re saying that we’re going to connect via USB make sure the USB connection is connected now it’s going to plug and play down here but if you can’t see but it’s saying that the devices are ready to use I don’t want to move this around too much right now it’s going to do the print a hint alignment so let’s see basis we have to do next right test printer will perform test printing will be performed to check the printers operation load plain paper as we already have if a print error occurs follow the on-screen instructions so let’s do that so this starts and I knew that it was going to do that it’s essentially it’s going to do a test print that was doing an alignment that something is Stephanie hello hello world and this is a quite a good print so let me just zoom out so I miss you f—ing it up for there no no if it isn’t in focus so it’s done a print so bingo bango it’s okay set this default printer and it’s done setup done next so we’re not I’m really not worried about these I’m just going to deselect those hit next because it’s not on my machine let’s go next exit so what I’m gonna do is I’m gonna print out a color picture so if I open this up with my Photo Viewer that’s a beautiful Marilu yet now if we do print print and let’s say do the full page fit this frame and we’re going to print on plain paper tell it to do it stuff let’s open up a look wait at once now the color does look a bit washed out it is only going to print to to this let’s go pencil let’s do something else print let’s try that’s interesting okay options okay I hope you can see what I’m doing so we’re going to do a high quality print it’s gonna print it let’s get a paper size okay let’s did 11 by May 5 let’s do it I’m gonna do in a smaller paper okay so high quality print this time a smaller size and let’s print out and see what happens interesting to see if there’s any on now ah this is a lot better this is very good quality I don’t know if you’re gonna be able to pick this up on it and thing but I continue now a hundred percent this is a fantastic quality color print in in high in on setting the high so I don’t know if this can be picked up do this yes can you see how that faith let’s fade it out and see how that some bang on so that’s good I’m liking that sucked so this is another thing document I want to scan on there okay close it down now this isn’t a photo yeah what I want to do is I want to scan this into my computer that bit about it resize to fit the desktop edit flip horizontal edit flip vertical there’s not fantastic as a scan could be the quality of the scan so let’s try another scan no but what I’m going to do this time I’m going to use no manual because this is pretty much okay it’s got some settings here photo color photo it’s not a photo it’s not a mega this magazine a document or color document grayscale hmm that’s interesting maybe that’s why the other one didn’t come out right so it’s not a photo it’s a magazine it’s not a document so it’s the magazine color let’s do a preview this is a lot faster ah now look at that so that looks better and looks like you can flip it around so that’s quite good so let’s do scan it maybe that’s where I went wrong with my other document so this is actually quite good because my HP software it doesn’t have have that facility so you can preview do whatever you want to do with it scan and you can actually print your destination there’s a printer or whatever but as I launched it from my my software it’s going to print it to that which is where I wanted I don’t only actually the print and I guess when I say scan that’s what I mean scan I supposed to photocopy so we’ll actually try also a photocopy there you go that’s that’s a lot better that is a lot better the quality is good okay so now let’s come out of this I don’t want to save it we know the print quality is good I want to do a copy but you know what I’m gonna do I’m gonna kill copy all remember they’re stopping at it it’s quite a bad quality it’s kind of faded that and that’s what I want to see but what we’re gonna do is we’re gonna use the setting to go to copy and then we’re gonna go okay standard copy oh it looks like it’s got a whole load of options here ID card copy standard copy borderless copy it’s quite good so I’ll have a little play around with those basically good number of sessions one one number now this is good I’m liking this I don’t know if you can see can you see it actually previews the document before it prints it out you can set the contrast that’s what it is like hundred percent and you can do it up or down that is a good feature do we want a black and white copy or a color copy I don’t want to waste the ink so let’s just do a a black and white copy that’s good that’s a lot faster yeah let’s see now that’s the zoom out now that’s the document and you can see this and fading but it’s a very crappy original copy so you’re not gonna get what I want and this is what I want to see well you know what the crappiness is like and I’m guessing if I change those settings for the contrast I can get this filled in but to be honest I’m happy with that so we’re all we’re all good now so what I’m going to do is I’m going to uninstall this off my computer put back my HP software and then I’m gonna take this downstairs put it on the desk install it do a couple of test prints make sure it’s okay and then I’m going to show you from there so guys excuse the mess on the table here we go with the Canon and what I’ve done is I’ve connected it up to this is my daughter’s PC oh sorry laptop and what I’ve done is I’ve hardwired it so we have the mains on there and it comes onto a USB a connector and there’s a as you said there’s as I said there’s USB B connector so how I’ve done it is hardwired her laptop so when she comes in all she has to do is hit the mains button because we’ve got this hooked up to this monitor so I don’t want to lift it in the monitor the lid up and down so what all she does is she powers it on the laptop boots up because he boots up on power up okay automatically boots up on power up and this will automatically see the mains but to power it on you then hit the home button the software loaded up finally didn’t exactly 100% plug and play with Windows 10 and that wasn’t an issue you saw the printouts there wasn’t anything else extra that I needed to put on and it was good so I would say for you really can’t go wrong I was looking at 150 maybe for a printer but I decided to get it on sale I haven’t done in your reviews online for this but I’ll probably do one so that’s about it so I hope you enjoyed this review for this for the Canon printer so so save can’t be good be careful can’t be careful naming off the be the big J AVM J catch you next time on Adrian J online and please like and subscribe take care bye for now
This Canon PIXMA TS-5120 All-In-One / Review ( Updated ) discuss the article in greater details that allows the consumers to make a decision wisely while picking this product.
That’s all for this post. Hopefully, we have covered every aspect for you. Keep visiting our blog for more informative Tech Articles.